You’ve decided to invest in a new pool for your home, but your mind is flooded with questions. Not because you don’t know how much it cost to build one, or how long it will take, or what kind of pool you want – all of these are settled. But you are much concerned about keeping your Custom swimming pools sparkling clean.
Here at Solstice Pool, an elite group of Swimming pool contractors in Montgomery TX, we have answered some of the frequently asked questions from clients wanting to build a pool in their home or businesses in Montgomery.
How Often Should You Replace Your Pool Filter?
Custom pools and spas are kept clean with the use of pool-filter cartridges. These cartridges are made of corrugated paper or polyester cloth that acts as a filter. Whenever the filter becomes dirty and clogged, it pollutes the water in the entire pool.
The pool-filter cartridge can run for many hours, up to 2,000 hours in a filter pump. Generally, filter cartridges are meant to be replaced once every one to two years. However, filter tends to get damaged if you enter into the pool with deodorants, hair-care products, suntan lotion, and other chemicals.
Before replacing the filters, their condition should be appropriately observed. If the cartridge looks loose or cracked, it then needs to be replaced.
Although, your pool-filter replacement depends on your pool size, the quality of the water used, and how often the pool is used. A pool regularly used, the filters are prone to get clogged easily as a result of dirt from body oils, and so on. Rinsing the filter after changing the water in the pool can help prevent these build-ups.
Do swimming pool pumps have to run all the time?
The pump remains the brain behind the swimming pool circulation system. The pumping system plays a major in clearing debris from the water and also keeping chemicals mixed by forcing water in and out of the filtration system. Many factors dictate how much time needed to run the filtration system, which includes the pool size and how often it is used.
Trying to conserve energy would affect both the environment and your purse. If you’re using a smaller, high-efficiency pump, and it’s operated for many hours as needed, a lot will be done towards reducing your pool maintenance cost. Although, the chemicals added to your pool while the water is circulating don’t need to recirculate because they would stay mixed without the water pumping continually. But then, it is recommended that all pool water must undergo filtration every 24 hours, yet, your pump doesn’t need to run at all times.
Dynamic, productive, and effortless maintenance activity to get rid of debris floating on the pool surface is using a hand-held skimmer. One other way to minimize the running rate/hour of your swimming pool pump is running it several times a day over short periods of time. If you think of operating your pump once daily, it’s better to do for six hours, do not go below six hours, especially during summer. For a frequently used pool, it’s advisable to run the pool pump for almost eight hours per day, often checking the water clarity and the chemical balance of the water. The use of a smaller pump for fewer hours daily are would be useful and would significantly reduce your energy bills.
Are you thinking about hiring one of the best Pool Builders in Montgomery TX, to build a pool around your home this coming summer? Reach out to us! Because this is the perfect time to commence the planning and design of your Montgomery custom pools against the next swimming!Pool Construction Montgomery TX